Ws2000> Admin(Network.wlan.hotspot.radius)> Set - Motorola WS2000 - Wireless Switch - Network Management Device System Reference Manual

WS2000> admin(network.wlan.hotspot.radius)> set
Description:
Configures the RADIUS server information for hotspots for each WLAN.
Syntax:
set server
port
secret
acct-
mode
acct-
timeout
acct-
retry
Example:
admin(network.wlan.hotspot.radius)>
admin(network.wlan.hotspot.radius)>
admin(network.wlan.hotspot.radius)>
admin(network.wlan.hotspot.radius)>
admin(network.wlan.hotspot.radius)>
admin(network.wlan.hotspot.radius)>
admin(network.wlan.hotspot.radius)>
admin(network.wlan.hotspot.radius)>
admin(network.wlan.hotspot.radius)>
admin(network.wlan.hotspot.radius)>
Primary Server Ip adr
Primary Server Port
Primary Server Secret
Secondary Server Ip adr
Secondary Server Port
<idx> <srvr_type>
<idx> <srvr_type>
<idx> <srvr_type
<idx> <mode>
<idx> <timeout>
<idx> <retry-
count>
Command Line Interface Reference
Sets the IP address <ipadr> of the RADIUS server
<ipadr>
for the WLAN with index <idx> (
<srvr_type> (
primary, secondary
the RADIUS server as a primary or a secondary
server.
Sets the port <port> of the RADIUS server for the
<port>
WLAN with the index <idx> (
<srvr_type> (
primary, secondary
the RADIUS server as a primary or a secondary
server.
Sets the secret <secret> for accessing the RADIUS
<secret>
server for the WLAN with the index <idx> (
The <srvr_type> (
identifies the RADIUS server as a primary or a
secondary server.
Enables or disables accounting mode for the
RADIUS server for the WLAN with the index <idx>
( ). When enabled, RADIUS accounting log is
1-8
written to the CF card when the RADIUS server is
not reachable.
Sets the time duration <timeout> (
after which RADIUS logs are written to the CF
card.
Sets the number of re-tries <retry-count> (
made before RADIUS logs are written to the CF
card.
set server 1 primary 192.169.1.222
set server 1 secondary 192.169.1.223
set port 1 primary 1812
set port 1 secondary 1812
set secret 1 primary hello1
set secret 1 secondary hello2
set acct-mode 1 enable
set acct-timeout 1 90
set acct-retry 1 8
show radius 1
: 192.169.1.222
: 1812
: ******
: 192.169.1.223
: 1812
). The
1-8
) identifies
). The
1-8
) identifies
1-8
)
primary, secondary
) seconds
1-255
1-10
13-209
).
)