13.65 System SNMP Traps Commands
WS2000>admin(system.snmp)> traps
Description:
Displays the SNMP traps submenu. The items available under this command are shown below.
add
Adds SNMP trap entries.
delete
Deletes SNMP trap entries.
list
Lists SNMP trap entries.
set
Sets SNMP trap parameters.
show
Shows SNMP trap parameters.
save
Saves the configuration to system flash.
quit
Quits the CLI.
..
Goes to the parent menu.
/
Goes to the root menu.
Command Line Interface Reference
13-323