Ws2000> Admin(Network.wips)> Update - Motorola WS2000 - Wireless Switch - Network Management Device System Reference Manual

WS2000> admin(network.wips)> update
Description:
Sends configuration information to dedicated sensor devices.
Syntax:
update
<mac>
Sends the configuration information to the sensor device, where:
• <mac> is the MAC address of the sensor device.
• <dhcp_mode> is the dhcp mode. Mode can be either
• <ipaddr> is the IP address of the sensor device. This field is only required when the <dhcp_mode> is
• <mask> is the subnet mask for the IP address of the sensor device. This field is only required when
• <dgw> is the default gateway for the sensor device. This field is only required when the
• <pwips> is the IP address of the primary WIPS server.
• <swips> is the IP address of the secondary WIPS server. This value is optional.
Example:
admin(network.wips)>
Sensor MAC
DHCP Mode
IP Address
IP Mask
Default Gateway
Primary WIPS Server
Secondary WIPS Server
admin(network.wips)>
192.168.1.10 192.168 .0.20 192.168.0.21
admin(network.wips)>
Sensor MAC
DHCP Mode
IP Address
IP Mask
Default Gateway
Primary WIPS Server
Secondary WIPS Server
<dhcp_mode> <ipaddr>
static.
the <dhcp_mode> is
static.
<dhcp_mode> is .
static
show sensor 00a0f8bf8a70
: 00a0f8bf8a70
: client
: 192.168.1.107
: 255.255.255.0
: 192.168.1.1
: 192.168.0.20
: 192.168.0.21
update 00a0f8bf8a70 static 192.168.1.108 255.255.255.0
show sensor 00a0f8bf8a70
: 00a0f8bf8a70
: client
: 192.168.2.100
: 255.255.255.0
: 192.168.2.1
: 192.168.0.20
: 192.168.0.21
Command Line Interface Reference
<mask> <dgw>
or
client static
13-233
<pwips> <swips>
.