Ws2000>Admin(Network.wan.nat)> Add - Motorola WS2000 - Wireless Switch - Network Management Device System Reference Manual

WS2000>admin(network.wan.nat)> add
Description:
Adds NAT records.
Syntax:
add inb
<idx>
Sets an inbound network address translation (NAT) for WAN address <idx>, where <name> is
the name of the entry (1 to 7 characters), <tran> is the transport protocol (one of
icmp
the ending port number in a port range, <ip> is the internal IP address, and <dst_port> is the
(optional) internal translation port.
Example:
admin(network.wan.nat)>add inb 2 special tcp 20 21 192.168.42.16 21
admin(network.wan.nat)>list inb 2
-----------------------------------------------------------------------------
index name
-----------------------------------------------------------------------------
1 special tcp
Related Commands:
delete inb
list inb
<name> <tran>
, , , , or ), <port1> is the starting port number in a port range, <port2> is
ah esp gre all
prot start port
20
Deletes one of the inbound NAT entries from the list.
Displays the list of inbound NAT entries.
Command Line Interface Reference
<port1> <port2>
end port internal ip
21 192.168.42.16
13-131
<ip> <dst_port>
, ,
tcp udp
translation port
21