Ws2000>Admin(Network.ap.mesh)>Set - Motorola WS2000 - Wireless Switch - Network Management Device System Reference Manual
Wireless switch
Hide thumbs
Also See for WS2000 - Wireless Switch - Network Management Device:
- Cli reference manual (452 pages) ,
- System reference manual (362 pages) ,
- Configuration manual (19 pages)
Table of Contents
Advertisement
13-54 WS2000 Wireless Switch System Reference Guide
WS2000>admin(network.ap.mesh)>set
Description:
Sets the mesh related parameters.
Syntax:
set
client
wlan
auto
base
max-
clients
Example:
admin(network.ap.mesh)>
admin(network.ap.mesh)>
------------------------------------------------------------------------------
"Mode"
------------------------------------------------------------------------------
Client Only
admin(network.ap.mesh)>
admin(network.ap.mesh)>
------------------------------------------------------------------------------
"Mode"
------------------------------------------------------------------------------
Base and Client
admin(network.ap.mesh)>
admin(network.ap.mesh)>
------------------------------------------------------------------------------
"Mode"
------------------------------------------------------------------------------
Base and Client
admin(network.ap.mesh)>
admin(network.ap.mesh)>
------------------------------------------------------------------------------
"Mode"
------------------------------------------------------------------------------
Base and Client
admin(network.ap.mesh)>
admin(network.ap.mesh)>
------------------------------------------------------------------------------
"Mode"
------------------------------------------------------------------------------
Base and Client
admin(network.ap.mesh)>
<radio-idx>
enable/
disable
<radio-idx> <wlan-id>
<radio-idx>
enable/
disable
<radio-idx> enable/
disable
<radio-idx> <max-
clients>
set client 1 enable
show 1
"WLAN"
"Base Auto Selection" "Max Clients"
WLAN1
Enabled
set base 1 enable
show 1
"WLAN"
"Base Auto Selection" "Max Clients"
WLAN1
Enabled
set wlan 1 3
show 1
"WLAN"
"Base Auto Selection" "Max Clients"
WLAN3
Enabled
set max-clients 1 4
show 1
"WLAN"
"Base Auto Selection" "Max Clients"
WLAN3
Enabled
set auto 1 disable
show 1
"WLAN"
"Base Auto Selection" "Max Clients"
WLAN3
Disabled
Enables or disables the mesh client for the radio with the
index <radio-idx>.
Selects the WLAN for the mesh client.
Enables or disables automatic base selection for the radio
with the index <radio-idx>
Enables or disables the radio <radio-idx> as the mesh base.
N/A
6
6
4
4
Hide quick links:
Advertisement
Table of Contents
