Ws2000> Admin(Network.wips)> Set - Motorola WS2000 - Wireless Switch - Network Management Device System Reference Manual

13-238 WS2000 Wireless Switch System Reference Guide
WS2000> admin(network.wips)> set
Description:
Sets the WIDPS parameters.
Syntax:
set mode
detect-
window
anomaly
-detect
enable/
disable
<detect
-
window>
mode
<violation
-type>
filter-
<violation
-type>
ageout
Enables
Sets the duration for which WIDS
information is collected. Once collected,
the information is sent for analysis.
enable/
Enables
disable
anomalies as set in <violation-type>.
The following are valid <violation-type>
values:
•
all
•
null-dst
anomaly
•
same-src-dst
destination IP anomaly
•
mcas-src
anomaly
•
weak-wep-iv
vector anomaly
•
tkip-cntr-meas
Countermeasures anomaly
•
invalid-frame-len
length anomaly
Sets the filter ageout value for the
<filter-
ageout>
anomalies as set in <violation-type>.
The following are valid <violation-type>
values:
The following are valid <violation-type>
values:
•
all
•
null-dst
anomaly
•
same-src-dst
destination IP anomaly
•
mcas-src
anomaly
•
weak-wep-iv
vector anomaly
•
tkip-cntr-meas
Countermeasures anomaly
•
invalid-frame-len
length anomaly
or WIDS
disables
or the detection of
disables
- all the anomalies.
- NULL destination MAC
- Same source and
- Multicast source MAC
- Weak WEP initialization
- TKIP
- Invalid frame
- all the anomalies.
- NULL destination MAC
- Same source and
- Multicast source MAC
- Weak WEP initialization
- TKIP
- Invalid frame