Ws2000>Admin(Network.fw.policy.inb)> Set - Motorola WS2000 - Wireless Switch - Network Management Device System Reference Manual
Wireless switch
Hide thumbs
Also See for WS2000 - Wireless Switch - Network Management Device:
- Cli reference manual (452 pages) ,
- System reference manual (362 pages) ,
- Configuration manual (19 pages)
Table of Contents
Advertisement
WS2000>admin(network.fw.policy.inb)> set
Description:
Sets inbound firewall policy parameters.
Syntax:
set saddr
<idx> <Ip Addr> <netmask>
daddr
<idx> <Ip Addr> <netmask>
tp
<idx> <tp>
sport
<idx> <port1>
dport
<idx> <port1>
rnat
<idx> <Ip Addr>
rport
<idx> <rport>
action
<idx>
Example:
admin(network.fw.policy.inb)>set tp 1 gre
admin(network.fw.policy.inb)>list
-----------------------------------------------------------------------------
Idx Src IP-Netmask
-----------------------------------------------------------------------------
1
209.239.160.202- 168.192.36.4-
255.255.255.224
admin(network.fw.policy.inb)>set sport 1 20 21
admin(network.fw.policy.inb)>set dport 1 200 201
admin(network.fw.policy.inb)>set action 1 allow
admin(network.fw.policy.inb)>list
-----------------------------------------------------------------------------
Idx Src IP-Netmask
-----------------------------------------------------------------------------
1
209.239.160.202- 168.192.36.4-
255.255.255.224
[<port2>]
[<port2>]
/
allow
deny
Dst IP-Netmask Tp SPorts DPorts Rev. NAT
255.255.255.0
Dst IP-Netmask Tp SPorts DPorts Rev. NAT
255.255.255.0
Command Line Interface Reference
Sets source IP address and IP netmask for inbound firewall
policy <idx>.
Sets destination IP address and IP netmask for inbound
firewall policy <idx>.
Sets transport protocol for inbound firewall policy <idx> to
<tp> (one of
,
,
all
tcp
udp
Sets source port range for inbound firewall policy <idx>
from <port1>
(
–
) to <port2>. If <port2> is not specified, <port1> is
1
65535
used as the top end of the range.
Sets destination port range for inbound firewall policy <idx>
from <port1> (
–
) to <port2>. If <port2> is not
1
65535
specified, <port1> is used as the top end of the range.
Sets reverse NAT IP address for inbound firewall policy
<idx> to
<
> (a.b.c.d).
Ip Addr
Sets reverse NAT port for inbound firewall policy <idx> to
<rport>
(
–
).
0
65535
Sets action of inbound firewall policy <idx> to allow or
deny.
gre 1:
1:
0.0.0.0
65535 65535
nat port 0
gre 20:21 200:
0.0.0.0
201
nat port 0
,
,
,
,
).
icmp
ah
esp
gre
Action
deny
Action
allow
13-75
Hide quick links:
Advertisement
Table of Contents
