Configuring Lightweight Directory Access Protocol (Ldap) Authentication - Motorola WS2000 - Wireless Switch - Network Management Device System Reference Manual

6.2.2 Configuring Lightweight Directory Access Protocol (LDAP) Authentication

When the RADIUS Data Source is set to use an external LDAP server (see
the LDAP screen is used to provide information about the external LDAP server. Select
Authentication] -->
LDAPS is set as the data source for the RADIUS server.
1. Fill out the LDAP Configuration area to allow the switch to work with the LDAP server. Consult with the
LDAP server administrator for details on how to set the values for the fields in this screen.
Fully Qualified Domain
Name
LDAP Server IP
Port
Login Attribute
Password Attribute
Bind Distinguished Name
Password
Base Distinguished Name
Group Attribute
Group Filter
RADIUS Server --> LDAP
Enter the fully qualified domain name of the external LDAP server. This server will
act as the data source for the RADIUS server. This server must be accessible from
the WAN port or from an active subnet on the switch.
Enter the IP address of the external LDAP server that will act as the data source for
the RADIUS server. This server must be accessible from the WAN port or from an
active subnet on the switch.
Enter the TCP/IP port number for the LDAP server that will act as a data source. The
default port is 389.
Enter the login attribute used by your LDAP server for authentication. In most cases,
the default value in this field should work.
Enter the password attribute used by your LDAP server for authentication.
Specify the distinguished name to bind with the LDAP server.
Enter a valid password for the LDAP server.
Specify a distinguished name that establishes the base object for the search. The
base object is the point in the LDAP tree at which to start searching.
Specify the group attribute used by your LDAP server.
Specify the group filters used by your LDAP server.
Configuring the RADIUS
The fields on this screen are only available when LDAP or
Administrator and User Access
Server),
[User
6-7