Chapter 4. Network Events And Kern Messages - Motorola WS5100 Series Troubleshooting Manual

Network Events and Kern Messages
This chapter includes two network event tables to provide detailed information and understanding of
potential network events. These tables are:
• Table 4.1, Network Event Message/Parameter Description Lookup
• Table 4.2, Network Event Course of Action Lookup on page 4-6
Table 4.1 Network Event Message/Parameter Description Lookup
ID Event Message
0 License number Changed license level from <XX> license
change number access ports to <YY> number
access ports.
1 Clock change The Wireless Switch clock was changed
<XX>/ <YY> seconds.
2 Packet discard Discarded Packet: Wrong NIC <XX> <XX> vs
[wrong NIC] <YY> from access port ZZ.
3 Packet discard Discarded Packet: Wrong VLAN <XX> <XX>
[wrong VLAN] vs <YY> from access port <ZZ>.
4 AP adopt failure Adoption <XX> failed. The MAC address
[general] has been used by an existing access port.
5 AP adopt failure Access port policy prevented port with MAC
[policy disallow] <XX> from being adopted.
6 AP adopt failure This event and message is currently not
[acl disallow] configured. It will be configured in the next
service release.
Parameters
XX = previous license number (an integer)
YY = new license number (an integer)
XX = + or -
YY = offset in seconds (an integer)
XX = Ethernet port that received the
packet = 1 or 2
YY = Ethernet Port that the access port
was adopted from = 1 or 2
ZZ = MAC (xx:xx:xx:xx:xx:xx) address of
the Access Port
XX = VLAN that received the packet (an
integer).
YY = VLAN the access port was adopted
from (an integer).
ZZ = MAC (xx:xx:xx:xx:xx:xx) address of
the access port.
XX = MAC (xx:xx:xx:xx:xx:xx) address of
the radio or access port.
XX = MAC (xx:xx:xx:xx:xx:xx) address of
the access port.
Not applicable.