Set Hotspot Configuration - Motorola WS2000 - Wireless Switch - Network Management Device System Reference Manual

8-4 WS2000 Wireless Switch System Reference Guide

8.2.2 Set Hotspot Configuration

Hotspots can be configured from the
configure the different parameters to enable users to use the hotspots.
To configure the hotspot:
1. Set the HTTP Redirection mode to either
successfully logs on using the hotspot, the user is redirected to a welcome screen. This selection decides
the redirection mode.
2. Set the location of the files the user is redirected to by selecting one of the
Card, or Use External URL
To use the standard redirect HTML files, select the Use Default Files option.
To use redirect HTML files stored on a CF card loaded to the switch, use
selected, the
To use redirect HTML files stored on a different location on the local network, use the Use External URL
option. When this option is selected, the
<WLAN Name> Hotspot Config
options.
CF Card Files area is enabled.
http or https by selecting the appropriate option. When a user
External URL area is enabled.
screen. This screen allows you to
Use Default Files,
Use CF Card option. When
Use CF