Setting Default Access Port Settings - Motorola WS2000 - Wireless Switch - Network Management Device System Reference Manual

MU dB This is a Motorola specific feature. This value indicates the amount of power in dBm that the MU
Power Level should reduce its Tx power by with respect to the Tx power of the AP. This feature is used to reduce
Adjustment the amount of radio noise in the environment for better reception.
5. Click Apply to save changes.
This screen also provides the ability to change several advanced settings for the Access Ports. For more
information, see Advanced Access Port

5.5 Setting Default Access Port Settings

The WS 2000 Network Switch can support up to six Access Port. These Access Ports can be either a 802.11a
or 802.11b radio type. When an Access Port associates with the wireless switch, the initial settings for that
Access Port are taken from the Default Access Port Setting for the appropriate radio type. Select
Configuration --> Wireless
Default settings screen for the appropriate radio type: one of
802.11b/g Defaults.
This screen is the 802.11a Defaults screen.
Settings.
--> Access Ports to see the list of Default radio settings. Then select the
Wireless Configuration
802.11a Defaults, 802.11b
5-19
Network
Defaults, or