WS2000>admin(network.dhcp)> set
Description:
Sets parameters for automated firmware and configuration upgrades.
Syntax:
set firmwareupgrade
configupgrade
interface
Example:
admin(network.dhcp)>
Auto Firmware upgrade flag
Auto Config upgrade flag
Interface
admin(network.dhcp)>set firmwareupgrade 1
admin(network.dhcp)>set con 1
admin(network.dhcp)>set inter s1
admin(network.dhcp)>show all
Auto Firmware upgrade flag
Auto Config upgrade flag
Interface
Related Commands:
show all
/
Enables (
1
0
/
Enables (
1
0
Sets the interface for the upgrades to <int>:
<int>
– subnet 1
s1
– subnet 2
s2
– subnet 3
s3
– subnet 4
s4
– WAN
w
show all
Shows the settings for all the automatic update parameters.
) or disables (
) automatic switch firmware upgrade.
1
0
) or disables (
) automatic switch configuration update.
1
0
: 0
: 0
: w
: 1
: 1
: s1
Command Line Interface Reference
13-61