Ws2000>Admin(System.authentication)> Set - Motorola WS2000 - Wireless Switch - Network Management Device System Reference Manual

WS2000>admin(system.authentication)> set
Description:
Sets the parameter that specifies how user authentication is taking place.
Syntax:
set mode
local
radius
auth-
local
loc
radius
Example:
admin(system.authentication)>
admin(system.authentication)>
authentication mode
admin(system.authentication)>
Related Commands:
set
/ Sets the authentication mode. If set to
serve as the data source. If set to
LDAP server for the information. If
under the
radius
/ Sets the Airbeam user authentication to either the local database or the
RADIUS server. If set to
for the authentication. If
RADIUS server is used for authentication.
set mode local
show all
Sets the parameters to specify that the external RADIUS server is used for user
authentication.
Command Line Interface Reference
local
, the switch will use an external
radius
is the mode, then the parameters
radius
submenu must to be set.
, the switch will use an external LDAP server
radius
is the authentication location, then the
radius
: local
, the internal User Database will
13-255