WS2000>admin(network.wan)> show
Description:
Shows the WAN parameters.
Syntax:
show ip
pppoe
Example:
admin(network.wan)>show ip 3
wan interface
ip address
network mask
default gateway
dhcp mode
primary dns server
secondary dns server
admin(network.wan)>show pppoe
pppoe mode
pppoe keepalive mode
pppoe authentication type
pppoe idle time
pppoe user name
pppoe password
Shows the general IP parameters for the WAN along with settings for the WAN
<idx>
interface associated with <idx> (where <idx> is in the range
Note: Note: If the WAN interface IP addresses have not been specified for <idx>, the IP and
Mask values will be shown as 0.0.0.0.
Shows all PPPoE settings.
Command Line Interface Reference
: enable
: 0.0.0.0
: 0.0.0.0
: 192.168.24.1
: enable
: 209.142.0.2
: 209.142.0.218
: enable
: disable
: chap
: 600
: JohnDoe
: ********
13-123
–
).
1
8