Ws2000>Admin(Network.ap.selfheal)>Set - Motorola WS2000 - Wireless Switch - Network Management Device System Reference Manual

13-40 WS2000 Wireless Switch System Reference Guide
WS2000>admin(network.ap.selfheal)>set
Description:
Sets the different self-heal parameters.
Syntax:
set interference-
avoidance
neighbor-
recovery
Example - set interference-avoidance:
admin(network.ap.selfheal)>set interference-avoidance mode enable
admin(network.ap.selfheal)>set interference-avoidance mode disable
admin(network.ap.selfheal)>set interference-avoidance max-retries 15
admin(network.ap.selfheal)>set interference-avoidance max-retries default
admin(network.ap.selfheal)>set interference-avoidance hold-time 24000
admin(network.ap.selfheal)>set interference-avoidance hold-time default
Example - set neighbor-recovery:
admin(network.ap.selfheal)>set neighbor-recovery mode enable
admin(network.ap.selfheal)>set neighbor-recovery mode disable
admin(network.ap.selfheal)>set neighbor-recovery action none radio 1
admin(network.ap.selfheal)>set neighbor-recovery action raise-power radio
1
admin(network.ap.selfheal)>set neighbor-recovery action open-rates radio
1
admin(network.ap.selfheal)>set neighbor-recovery action both radio 1
mode
enable/
disable
max-retires
<max-
retires>/
default
hold-time
<hold-time>/
default
mode
enable/
disable
action
<radio-idx>
offset
<radio-idx>
Sets the self-healing interference
mode.
Sets the threshold limit on the
maximum number of retires permitted.
Sets the hold-time between running
two consecutive interference
avoidance algorithms.
is 14.
Enables or disables neighbor recovery.
Sets the neighbor recovery action for
<action>
the portal. <radio-idx> is the id of the
radio for which action specified in
<action> must be taken. Select
<action> from
power, open-rates, both
Sets the radio offset value for the
<offset>
/default
radio <radio-idx> when the set action
is raise-power. <offset> value is
between <0-65535>.
is 0.
value
default
none, raise-
.
value
default