Ws2000>Admin(System.snmp.traps)> Add - Motorola WS2000 - Wireless Switch - Network Management Device System Reference Manual

13-324 WS2000 Wireless Switch System Reference Guide
WS2000>admin(system.snmp.traps)> add
Description:
Adds SNMP trap entries.
Syntax:
add v1v2
<ip> <port> <comm>
Adds an entry to the SNMP v1/v2 access list with the destination IP address set to <ip>, the
destination UDP port set to <port>, the community string set to <comm> (1 to 31 characters), and
the SNMP version set to
v3
<ip> <port> <user>
Adds an entry to the SNMP v3 access list with the destination IP address set to <ip>, the
destination UDP port set to <port>, the username set to <user> (1–31 characters), and the
security type set to one of
The following parameters must be specified if <sec> is
Authentication type <auth> set to
Authentication password <pass1> (8–31 chars)
The following parameters must be specified if <sec> is set to
Example:
admin(system.snmp.traps)>add v1v2 203.223.24.2 333 mycomm v1
admin(system.snmp.traps)>list v1v2c
----------------------------------------------------------------------
index dest ip
----------------------------------------------------------------------
1 203.223.24.2
admin(system.snmp.traps)>add v1v2 209.255.32.1 334 jumbo v2
admin(system.snmp.traps)>list v1v2c
----------------------------------------------------------------------
index dest ip
----------------------------------------------------------------------
1 203.223.24.2
2 209.255.32.1
admin(system.snmp.traps)>add v3 201.232.24.33 555 BigBoss none md5
admin(system.snmp.traps)>list v3 all
index
destination ip
destination port
username
security level
auth algorithm
auth password
v1
or
v1 v2
<sec>
none
Privacy algorithm set to
des
Privacy password <pass2> (8–31 chars)
dest port
333
dest port
333
334
/
v2
.
<auth> <pass1>
, , or .
auth auth/priv
auth
or
md5 sha1
or
aes
community
mycomm
community
mycomm
jumbo
: 1
: 201.232.24.33
: 555
: BigBoss
: none
: md5
: ********
<priv> <pass2>
or :
auth/priv
:
auth/priv
version
v1
version
v1
v2