WS2000> admin(network.wips)> convert
Description:
Converts an existing AP to a dedicated Sensor device. This command is only valid for Motorola AP300.
Syntax:
convert
<mac1> <mac2> ...
Example:
admin(network.wips)>
Conversion is started in the background
admin(network.wips)>
-----------------------------------------------------------------------------
Idx
Sensor MAC
-----------------------------------------------------------------------------
1
00a0f8bf8a70
Converts the list of AP represented by their MAC addresses <mac1>
<mac2>... to dedicated sensor devices.
convert 00a0f8bf8a70
list sensors
IP address
192.168.0.167
Command Line Interface Reference
13-231