Table of Contents
Advertisement
3 - 24 WiNG 4.4 Switch System Reference Guide
3.2.6 Configuring WAN Interface Cards
The RFS6000 switch supports 3G Wireless WAN cards using the ExpressCard slot. In order to use a 3G Wireless WAN card
with the switch, it must first be initialized on a laptop. For activation and initialization information, refer to the instructions
included with the card. If your Wireless WAN Interface card service provider makes use of a PIN number for access to the
network, disable the PIN number before using the card with the switch.
To configure a Wireless WAN Interface card:
1. Select
Switch
2. Select the
Wireless WAN Interface Card
3. Enter the following parameters to configure a WAN Interface Card:.
Access Port Name
User Name
Password
Activation Mode
Preferred DNS
Server
Alternate DNS
Server
NOTE: To use a 3G Wireless WAN card with the switch, it must first be initialized on a laptop. For
activation and initialization information, refer to the instructions included with the WAN card. If your
Wireless WAN Interface card service provider makes use of a PIN number for access to the network,
disable the PIN number before using the card with the switch.
>
Ports
from the main menu tree.
If your Wireless WAN service provider requires you to specify an Access Port Name, enter that
value here. The range is <0-25> and default value is 0
Enter the
User Name
configured for use with the Wireless WAN Interface Card. The string range
is <0-32> and default value is 0
Enter the
Password
associated with the above User Name for the Wireless WAN Interface
Card.The string range is <0-30> and default value is 0
Select
Enable
from the pull-down menu to enable the Wireless WAN Interface Card. Select
Disable from the pull-down menu to turn off the Wireless WAN Interface Card.
Displays the primary/preferred DNS Server provided by the Wireless WAN service provider.
Displays the secondary/alternate DNS Server provided by the Wireless WAN service provider.
tab.
Advertisement
Table of Contents
Troubleshooting
