Displaying Acls; Displaying Acps - HP 7102dl - ProCurve Secure Router Configuration Manual

Configuring Network Address Translation
Viewing ACLs and ACPs
6-18

Displaying ACLs

To view all of the ACLs that are configured on the ProCurve Secure Router,
move to the enable mode context and enter:
ProCurve# show access-lists
As Figure 6-5 shows, this command lists the following information for
each ACL:
type of ACL—standard or extended
all entries in the ACLs
number of matches for each entry
ProCurve# show access-lists
Extended IP access list Internet
permit tcp any
permit tcp any
permit tcp any
permit tcp any
permit tcp any
permit tcp any
remark ACL for traffic destined to the Internet
Extended IP access list Webserver
permit tcp any
remark ACL for traffic to internal Web server
Figure 6-5. Displaying All the ACLs Configured on the Router
You can use this information to review the ACLs that are configured and to
ensure that they are configured correctly.

Displaying ACPs

To view all of the ACPs that are configured on the ProCurve Secure Router,
move to the enable mode context and enter:
ProCurve# show ip policy-class
any eq www (300 matches)
any eq smtp (1 matches)
any eq pop3 (0 matches)
any eq ftp (0 matches)
any eq ftp-data (0 matches)
any eq domain (0 matches)
10.1.1.1 eq www (42 matches)