Using the Web Browser Interface for Advanced Configuration Tasks
Configuring Quality of Service
C a u t i o n
16-62
Configuring QoS for VoIP with the QoS Wizard
The QoS wizard guides you through the process of configuring QoS for VoIP
applications.
The QoS wizard erases any QoS maps already applied to the interface you
select for VoIP traffic. You should therefore use the wizard before configuring
your own QoS policies.
1.
Select QoS Wizard under Router/Bridge in the left navigation bar. You will
move to the wizard's Welcome window. Click Next.
2.
In the Select WAN Interface window, from the WAN Interface pull-down
menu, select the interface used to carry VoIP traffic. Interfaces are listed
by both physical and logical interface. The menu only includes activated
interfaces that have been bound to a logical interface.
Figure 16-48. Selecting the Interface to Carry VoIP Traffic
3.
Click Next.