Network Monitoring
Configuring Network Monitoring
9-56
Viewing the track in real time shows moment-to-moment changes:
Syntax: show track <name> realtime
You can view the entire configuration for all tracks configured on the ProCurve
Secure Router by entering this enable mode command:
Syntax: show running-config track [verbose]
Use the verbose option to see all commands, including default settings that
you have not altered.
Debugging Network Monitor Tracks
Another way to monitor track activity in real time is to view debug messages.
These messages give you more detailed information about the track's func-
tions. Enter this enable mode command:
Syntax: debug track
Debug messages display when the track disables or enables a route. For
example:
NETWORK.MON track SiteB Static Route 192.168.100.0 255.255.255.0 ppp 1 disabled
Viewing Network Monitor Probes
You might see from a track that a probe's state has changed. View the probe
itself for more information, entering this command from the enable mode
context:
Syntax: show probe [<name> {realtime}]
Use the realtime keyword to view the results of each test as they occur.
Specify a name to see one probe only. If you do not specify a name, the CLI
displays all configured probes (but you cannot view multiple probes in
real time).
The show probe command displays the following information about a probe's
status and configuration:
Current State—Pass or Fail
Admin. Status—Up (active) or Down (inactive or shut down)
The state is automatically Pass if the status if Down.
Type—ICMP echo, TCP connect, or HTTP request
Period—the time (in seconds) between tests