HP 7102dl - ProCurve Secure Router Configuration Manual page 876

IP Routing—Configuring RIP, OSPF, BGP, and PBR
Troubleshooting Routing
15-150
Table 15-20. Viewing the Routing Table
Portion of the Table
directly connected routes
statically entered routes
BGP
RIP
OSPF
summary
If the destination in question has a static route, you should double-check that
the route has been entered correctly.
If the table does not include a route for the destination, you must either add
a static route, if you are using that method, or troubleshoot your network's
routing protocol.
Refer to the show and debug commands listed in Table 15-21 as you trouble-
shoot routing.
Table 15-21. Routing show and debug Commands
View
all RIP debug messages
RIP events
routing configurations for RIP
all OSPF events
OSPF interfaces
OSPF neighbors
routing configurations for OSPF
BGP messages
BGP routes
statistics for path to BGP
neighbors
routing configurations for BGP
Command Syntax
show ip route connected
show ip route static
show ip route bgp
show ip route rip
show ip route ospf
show ip route table
Command Syntax
debug ip rip
debug ip rip events
show running-config router rip
debug ip ospf
show ip ospf interface
show ip ospf neighbor
show running-config router ospf
debug ip bgp
show ip bgp
show ip bgp summary
show running-config router bgp