Using the Web Browser Interface for Advanced Configuration Tasks
Figure 16-52. Finding the Name of the QoS Map Created by the QoS Wizard
10. After clicking Finish, click Exit to close the wizard and return to the main
Web browser interface.
Configuring LLQ
To enable LLQ in the Web browser interface, first configure a QoS map with
an entry for each low latency queue. The entry defines the criteria for traffic
and sets the maximum bandwidth guaranteed to such traffic. You then assign
the queue to an interface.
Criteria include:
IP precedence values
Diffserv values
IP header fields
destination UDP realtime protocol (RTP) port
bridged traffic
To configure LLQ, complete these steps:
1.
Select QoS Maps under Router/Bridge in the left navigation bar.
Configuring Quality of Service
16-67