HP 7102dl - ProCurve Secure Router Configuration Manual page 930

Using the Web Browser Interface for Advanced Configuration Tasks
Managing AutoSynch™, Files, Firmware, Logging, and Boot Software
16-16
Figure 16-14. Add Debug Filter Specifics
4. Click the Apply button.
5. Repeat steps 2 through 4 for all other debug filters that you want to add.
6. If you want to delete one or more debug filters that you have selected,
check the box for each filter that you want to delete. You can check or
uncheck all listed categories by clicking the Debug Category box (and you
can then still check or uncheck individual boxes as needed). Then click
the Remove Selected Events button to delete all checked filters.
Figure 16-15. Start Debug