HP 7102dl - ProCurve Secure Router Configuration Manual page 232

ProCurve Secure Router OS Firewall—Protecting the Internal, Trusted Network
Quick Start
4-32
4. Set the priority level for events logged to the router's event history.
Syntax: event-history priority [info | notice | warning | error | fatal]
For example:
ProCurve(config)# event-history priority info
5. If so desired, change the timeouts for TCP and UDP and ICMP sessions:
Syntax: ip policy-timeout [tcp | udp] all-ports <seconds>
Syntax: ip firewall policy-timeout icmp <seconds>
6. You can also configure individual timeouts for various TCP and UDP
protocols such as Telnet, SNMP, and HTTP. Enter:
Syntax: ip policy-timeout [tcp | udp] [all-ports | <port> | range <first port> <last
port>] <seconds>
You can enter ports as a number or as a keyword:
ProCurve(config)# ip policy-timeout [tcp | udp] ?
This command displays a complete list of keywords for well-known ports.
7. If so desired, enable log forwarding to a syslog server.
a. Enable log forwarding:
ProCurve(config)# logging forwarding on
b. Specify the syslog server address:
ProCurve(config)# logging forwarding receiver-ip <A.B.C.D>
8. If so desired, enable the router to email events.
a. Enable log forwarding to email:
ProCurve(config)# logging email on
b. Specify the email server address:
ProCurve(config)# logging email receiver-ip [<A.B.C.D> | <hostname>]
c. Specify the email address or addresses:
ProCurve(config)# logging email address-list <email address>;<another
email address>
You can enter any number of email addresses. (Do not put a space
between the
;
and the next address.)