HP 7102dl - ProCurve Secure Router Configuration Manual page 923

N o t e
Using the Web Browser Interface for Advanced Configuration Tasks
Managing AutoSynch™, Files, Firmware, Logging, and Boot Software
flash, it looks on the internal flash memory for a valid file. You can configure
the router to load a different configuration by specifying this configuration's
filename and location.
1. Select the primary startup-config file from the pull-down menu. This menu
contains a list of configuration files on the internal flash memory (and
compact flash if installed).
2. To set the secondary startup-config file, select the desired configuration
file from the corresponding pull-down menu.
3. To save these changes, click Apply.
If AutoSynch™ is enabled, the primary and backup startup-config files and
locations are automatically set and cannot be changed.
Save-Config. The Save-Config window allows you to save the running-
config file to the startup-config file. The current configurations will be saved,
and the router can then boot with these configurations after it is
powered down.
Click the Save button. If AutoSynch™ is enabled, the running-config is saved
as startup-config on both the internal flash memory and the compact
flash card.
Figure 16-4. Save Config
Download Config. The Download Config section allows you to save the
startup-config to a file on your PC. This feature is particularly useful when you
must configure several routers with similar settings and you need to edit the
configuration to tailor it to another router.
1. Click the Download button. Depending on your browser, a File Download
warning window will display. When you download the file, it is automati-
cally named <hostname>-<date>.cfg. For example, if you configured your
router's hostname as HQRouter and today's date were May 5, 2007, the
filename would be HQRouter-05-05-2007.cfg.
2. Double-click the file you want to download to your PC.
16-9