Configuration Examples; A Headquarters And Two Small Remote Sites - HP 7102dl - ProCurve Secure Router Configuration Manual

Procurve secure router 7000dl series - advanced management and configuration guide
Hide thumbs Also See for 7102dl - ProCurve Secure Router:
Table of Contents

Advertisement

Configuring Multicast Support with PIM-SM
Configuring PIM-SM
Site A
Router A
10.1.66.0/24
13-40
pruning the interface is determined by the sum of the override timer and the
propagation delay. Take care in altering these timers; they should match on
all neighboring routers so that one router does not delete an entry too soon.

Configuration Examples

This section guides you through the process of configuring PIM-SM in several
simplified scenarios.
Example 1: Configuring PIM-SM in a Network with a
Headquarters and Two Small Remote Sites
The network in Figure 13-12 includes a headquarters with many routers (only
three are shown for simplicity), including a WAN router that connects to two
remote sites in a Frame Relay network. The remote sites each include only
one router which serves both the LANs and provides the Frame Relay connec-
tion to the headquarters.
The multicast sources are located at the headquarters site. All hosts in at the
headquarters and the remote sites may potentially need to receive multicasts.
.2
10.1.32.0/30
HQ Router
Router D
.2
.1
10.1.63.1
Router C
HQ
Figure 13-12.Example 1 Network
.2
.1
.1
.1
10.1.1.0/30
.2
Multicast
source
10.1.20.0/24
Site B
Router B
10.1.129.2

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Procurve secure router 7203dl j8753a j8753a

Table of Contents