Hardware Management; Displaying Electrical Label Data; Displaying Card Information - HP A8800 Installation Manual

Hardware management

This chapter describes the hardware management functions of the router.

Displaying electrical label data

Electrical label data is also called permanent configuration data or archive information, which is
written to the storage component of a card during device debugging or testing. The information
includes name of the card, card serial number, and vendor name.
Use the display device manuinfo command to display the electronic label data for your router,
including the card name, serial number, MAC address, manufacturing date, and vendor name.
# Display the electrical label data for the card in slot 3 on your router.
<Sysname> display device manuinfo slot 3
Slot 3:
DEVICE_NAME
DEVICE_SERIAL_NUMBER : 210231A0E50103000002
MAC_ADDRESS
MANUFACTURING_DATE
VENDOR_NAME
Slot 3 Subslot 1:
DEVICE_NAME
DEVICE_SERIAL_NUMBER : 210231A85JH105000015
MAC_ADDRESS
MANUFACTURING_DATE
VENDOR_NAME
NOTE:
The output depends on your router model.

Displaying card information

Use the display device command to display your router's card information, including the slot number,
card type, card status, and software version.
# Display summary information for all cards on your router.
<Sysname> display device
Slot No.
0
1
2
3
Sub1
4
5
: SPC-1010-II
: 000f-e200-5600
: 2011-02-28
: HP
: PIC-TCP8L
: NONE
: 2010-05-24
: HP
Brd Status
Brd Type
SR02SRP2F3 Master
NONE Absent
NONE Absent
SPE-1010-II Normal
PIC-TCP8L Normal
NONE Absent
NONE Absent
Software Version
A8800-CMW520-R3342
NONE
NONE
A8800-CMW520-R3342
NONE
NONE
33