HP 7102dl - ProCurve Secure Router Configuration Manual page 717

If you enter the show lldp neighbors command without any options, you can
also view a summary of the LLDP information. The summary includes only:
system name
(neighbor's) port ID
TTL
enabled capabilities
platform
local port
ProCurve# show lldp neighbors
Capability Codes: R - Router, B - Bridge, H - Host, D - DOCSIS Device,
W - WLAN Access Point, r - Repeater, T - Telephone
System Name Port ID
------------------ -------------- ------ -------- -------------- -----
SiteA ppp 1
Neighbor's connecting
interface
Figure 14-4. Viewing LLDP Neighbors
Figure 14-4 shows an example of the output of the show lldp neighbors
command.
As with the detailed display, you can limit the summary to the neighbor or
neighbors of a specific interface with the interface <interface ID> option.
For example:
ProCurve# show lldp neighbors interface ppp 1
Alternatively, you can limit information to a specific neighbor if you know that
neighbor's system name:
Syntax: show lldp device <system name>
A ProCurve Secure Router's system name is its hostname. For example, enter:
ProCurve# show lldp device RouterA
The show lldp device command automatically produces the detailed display.
Link Layer Discovery Protocol
Viewing LLDP Information
TTL Cap. Platform
120 ----R--- ProCurve Secu
Local connecting interface
How long the router should
store this information
Local Int
ppp 1
14-7