Reboot Unit - HP 7102dl - ProCurve Secure Router Configuration Manual

Using the Web Browser Interface for Advanced Configuration Tasks
Managing AutoSynch™, Files, Firmware, Logging, and Boot Software
C a u t i o n
C a u t i o n
16-18
If you click the Stop Debug, Add Debug Filter, or Remove Selected Events
button while debug is running, the current debug output on the screen will
be lost.
As you use the debug commands in the Web interface to troubleshoot your
router, be aware that debug operations are processor-intensive and could
seriously degrade network performance.

Reboot Unit

After you have uploaded new firmware or done some configuration work, you
may need to reboot the router to make the changes active. Select Reboot Unit
under Utilities in the navigation bar.
Figure 16-17.Reboot Unit
1. Click the Save and Reboot button to save a copy of the current configura-
tion to a startup-config file. If you are running AutoSynch™, a copy is
saved to both internal flash and compact flash. This option allows you to
keep the current configuration and reboot the router.
If you have made changes to the Ethernet or WAN interface that you are using
to access the Web browser interface, or if you have made changes to any
security policies, saving and rebooting may lock you out of the router.
2. Click the Reboot (Do Not Save) button to immediately reboot the router
without keeping any changes made to the configuration since the last
save. If you have made experimental changes to the router or if you have
made changes that are causing operation problems, you may want to
reboot the router and have it revert to a previous working configuration.