Configuring Access Control Policies (Acps) - HP 7102dl - ProCurve Secure Router Configuration Manual

Using the Web Browser Interface for Advanced Configuration Tasks
Configuring Access Control from the Web Browser Interface
16-44
10. In the Destination Data section, define the destination IP address
and port.
11. Click the Apply button to save your changes.
The permit or deny statement that you configured is listed on the Add/Modify/
Delete Traffic Selectors screen.

Configuring Access Control Policies (ACPs)

1. Click Security Zones in the Firewall section of the navigation bar. The
Edit Security Zones window is displayed.
Figure 16-34. Configuring Security Zones
2. Click the Rename button next to the Security Zone that you want to edit.
The Configure Security Zone Name window is displayed.
Figure 16-35. Configure Security Zone Name Window
3. Enter a name for the security zone and click Apply. The Configure Policies
for Security Zone window is displayed.