HP 7102dl - ProCurve Secure Router Configuration Manual page 970

Using the Web Browser Interface for Advanced Configuration Tasks
Configuring Access Control from the Web Browser Interface
16-56
Figure 16-44. Add New Custom Policy
8. For Filter Type, select Permit or Deny.
9. For Protocol, select any or a specific protocol.
10. If you select ICMP, then you can select an ICMP message type from a list
of well known types.
11. Configure the Source Host/Network.
12. If you select UDP or TCP as the protocol, you can select a source port
as well.
13. Configure the Destination Host/Network.
14. If you select UDP or TCP as the protocol, you can select a destination port.
15. Click Apply.