Configuring Session Timeouts - HP 7102dl - ProCurve Secure Router Configuration Manual

Using the Web Browser Interface for Advanced Configuration Tasks
4. The default port for the SIP ALG is UDP 5060. If you want, you can add
protocol ports to the ALG. Enter the number of the UDP port in the Port
field of the Add SIP ALG Port section. Click Add Port.
5. Click Apply to save your changes. Or, to return the ALGS to the settings
that were established the last time the Apply button was clicked (not to
the default settings), click Reset.
Figure 16-25. Enabling and Disabling ALGs

Configuring Session Timeouts

1. Select General Firewall under Firewall in the left navigation bar.
2. In the Firewall Configuration window, select the General Settings tab.
Configuring the ProCurve Secure Router OS Firewall
16-35