HP 7102dl - ProCurve Secure Router Configuration Manual page 350

Content Filtering
Quick Start
7-22
5. For advanced configuration, complete this step. Otherwise, move directly
to step 6.
a. Add domain names that the router either permits or denies without
contacting the Websense server:
Syntax: ip urlfilter exclusive-domain <permit | deny> <FQDN>
b. Specify the maximum number of outstanding requests the router
allows to the Websense server (before dropping new requests):
Syntax: ip urlfilter max-request <1 to 500>
c. Specify the maximum number of Web server responses the router
buffers:
Syntax: ip urlfilter max-response <1 to 100>
6. Apply the filter to one or more logical interfaces. (The interface must have
an IP address.)You can apply the filter to inbound traffic or to outbound
traffic.
Syntax: interface <interface ID>
Syntax: ip address <A.B.C.D> <subnet mask | /prefix length>
Syntax: ip urlfilter <name> [in | out]