Procurve Secure Router; Customizing Your Policies - HP 7102dl - ProCurve Secure Router Configuration Manual

Using the Web Browser Interface for Advanced Configuration Tasks
Configuring Policies to Control Management Access to
the ProCurve Secure Router
1. To create a policy that controls management access to the router, use the
pull-down menu to select Admin Access for the Policy Type in the Add
New Policy window. Click Continue. The Add New Policy to Security
Zone window is displayed.
Figure 16-42. Policies for Controlling Management Access to the Router
2. For Public Address, select Any or specify a subnet. This setting deter-
mines the source address—the hosts that you want to be able to access
the router.
3. For Admin Access Type, select the types of access methods that you want
to permit.
4. Click Apply. The policy that you created is now listed on the Configure
Policies for Security Zone window.

Customizing Your Policies

When you first start configuring policies, the Filter, Allow, Many:1 NAPT, and
Port Forward options will help guide you through the process of setting
control access on your router. As you become more experienced, however,
you may want more flexibility in configuring policies.
Configuring Access Control from the Web Browser Interface
16-53