HP 7102dl - ProCurve Secure Router Configuration Manual page 968

Using the Web Browser Interface for Advanced Configuration Tasks
Configuring Access Control from the Web Browser Interface
16-54
If the other options do not allow you to configure exactly the policy you need
for your network, you should select the Advanced option for Policy Type. For
example, if you want to configure one-to-one NAT and specify the public
address, rather than selecting an interface and using the IP address assigned
to it, you should create an Advanced policy.
1. In the Add New Policy window, use the Policy Type pull-down menu to
select Advanced. Click Continue. The Add New Policy to Security Zone
window is displayed.
Figure 16-43. Configuring Advanced Policies
2. For Policy Action, you can select one of the following:
• Allow—Select this option to allow certain types of traffic.
• Allow Reverse—Select this option to configure a policy that affects
return traffic.
• Discard—Select this option to discard, or block, certain types of
traffic.
NAT—Select this option to configure either many-to-one NAT or one-
•
to-one NAT.