HP 7102dl - ProCurve Secure Router Configuration Manual page 978

Using the Web Browser Interface for Advanced Configuration Tasks
Configuring Quality of Service
16-64
6. In the Configure Max Bandwidth window, enter the bandwidth for the
queue in Kbps. This bandwidth is the maximum guaranteed. (When the
network is not congested, VoIP traffic can burst past this rate.)
The window will display the maximum bandwidth available on the inter-
face as the high end of the Limit. For example, in Figure 16-50, VoIP traffic
will be carried over a single E1 carrier-line.
The wizard automatically specifies 60 percent of the interface's access
rate for the queue's maximum guaranteed bandwidth. In the example in
Figure 16-50, the default value is 1228 Kbps. You can accept this value or
set your own.
Figure 16-50. Specifying the Maximum Bandwidth Guaranteed to a Queue
The documentation for your VoIP application may instruct you how to
determine the necessary bandwidth. You can also see Chapter 8: Setting
Up Quality of Service for some general guidelines.
Click Next.