Debug - HP 7102dl - ProCurve Secure Router Configuration Manual

Using the Web Browser Interface for Advanced Configuration Tasks
Managing AutoSynch™, Files, Firmware, Logging, and Boot Software
C a u t i o n
16-14
Figure 16-10.Delete Firmware
1. Select the file that you want to delete from the Delete Firmware pull-down
menu, which lists all files in the router's memory that have a .biz extension.
2. Click the Delete button.
Deleting the current firmware version or deleting all firmware from the
router's memory may prevent the router from booting. Be very careful when
deleting your router's firmware. You may want to keep a backup copy of the
current firmware version.

Debug

The Debug section lets you activate debug messages that provide real-time
information about the activity of processes and protocols that are run on the
router. Debug messages are displayed as packets arrive on the router, and are
useful when troubleshooting or testing your router's operation.
The debug messages generated using the Web interface are equivalent to the
corresponding CLI debug commands. For example, to view detailed messages
about the network monitoring track in real time, if you select the Track filter
in the Web interface, you will see the same messages that you will if you enter
the CLI debug track command from the enable mode context.
You can generate messages using one or more debug filters—for example, to
display track and PPP debug messages at the same time. Some debug filters
have subcategories, such as the PPP filter's Authentication subcategory
(equivalent to running the CLI debug ppp authentication command). Other
debug filters may require additional information, such as an access list name
for the Access-List filter (as in the CLI debug access-list <listname>
command).