Viewing Local Lldp Activity - HP 7102dl - ProCurve Secure Router Configuration Manual

Link Layer Discovery Protocol
Viewing LLDP Information
14-8
You can also view actual information about neighbors as this information
updates in real time. (See Figure 14-5.) Enter:
Syntax: show lldp neighbors realtime
--------------------------------------------------------------------
Capability Codes: R - Router, B - Bridge, H - Host, D - DOCSIS Device,
W - WLAN Access Point, r - Repeater, T - Telephone
System Name
---------------- -----------
Site B eth 0/1
Site C ppp 1
Steadily counts down
--------------------------------------------------------------------
Exit - 'Ctrl-C', Freeze - 'f', Resume - 'r'
Return to the command line
Figure 14-5. Viewing LLDP Neighbors in Real Time
If you want to view the entire LLDP message as it arrives, use the debug lldp
commands. (See "Viewing Real-Time LLDP Messages: debug lldp Commands"
on page 14-9.)

Viewing Local LLDP Activity

To see information about LLDP activity on the router, enter:
Syntax: show lldp
This command displays how often router interfaces send out LLDP and TTL
packets.
To view information about the messages the router has received from, as well
as transmitted to, its neighbors, enter:
Syntax: show lldp interface [<interface ID>]
Figure 14-6 shows the information that displays.
Port ID TTL Cap.
---- ------
114 ----R--- ProCurve Secu
900 ----R--- ProCurve Secu
110
Stop and start the refresh
Platform Local Int
------------ --------
eth 0/1
ppp 1