Using the Web Browser Interface for Advanced Configuration Tasks
Configuring the ProCurve Secure Router OS Firewall
16-40
Figure 16-29. Viewing Settings Established by the Firewall Wizard
10. Review the NAT settings in the Confirm Settings window. All hosts that
connect through the Private Interface will use the address on the public
interface. You can use the Back button to fix a misconfiguration or add a
server. You can also select a window from the left navigation bar.
11. If the settings are correct, click Finish.
12. Click Exit to return to the main window.
If necessary, you can now customize settings by editing the Public and Private
security zones. See the next section, "Configuring Access Control from the
Web Browser Interface" on page 16-41.