Run Maintenance Program Dialog Box - Compaq AlphaServer DS20E Reference Manual

4. In the Run Maintenance Program dialog box, type the name of the program
to be run in the Program Name: field. The program must be an executable.
NOTE: If the utility you want to run is on a diskette, you can type the utility's
name into the Program Name: field and press Enter to execute the
program.
5. Tab to the Location: list box and select the hard disk partition, diskette, or
CD-ROM drive from which to run the program.
6. Press Enter to execute the program.
Figure 5–18 Run Maintenance Program Dialog Box
Run Maintenance Program
Program Name: __________________
Location: A:
ENTER=Execute
5-40 DS20E Reference Guide
All manuals and user guides at all-guides.com
F1-Help
ESC=Quit
CAT0138