Removing The Front Bezel; Rear Panel Connectors - Compaq ProLiant 800 Manual

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-6 Compaq ProLiant 800 Features

Removing the Front Bezel

To gain access to ProLiant 800 hard drive and removable media, remove the
front bezel:
1. Remove the side access panel.
2. Release the three snaps that hold the bezel in place; two are located on
the side of the bezel and one at the bottom.
3. Rotate the bezel out to about 45 degrees, then pull to remove the bezel
from the chassis.
Figure 1-5. Opening the front bezel

Rear Panel Connectors

The following illustrations and tables show and describe the connectors on the
rear panel of the server. Each connector includes an icon to help you identify
its function.
Writer: Project: Compaq ProLiant 800 Features Comments:
File Name: C-ch1.doc Last Saved On: 4/23/97 11:09 AM