Installing The Mounting Hardware; Preparing The Srx210 Services Gateway For Rack-Mount, Desk-Mount, And Wall-Mount Installation; Preparing The Srx210 Services Gateway For Rack-Mount Installation - Juniper SRX210 Series Manual

CHAPTER 12

Installing the Mounting Hardware

Preparing the SRX210 Services Gateway for Rack-Mount, Desk-Mount, and Wall-Mount
Installation
Related
Documentation

Preparing the SRX210 Services Gateway for Rack-Mount Installation

Copyright © 2012, Juniper Networks, Inc.
Preparing the SRX210 Services Gateway for Rack-Mount, Desk-Mount, and Wall-Mount
Installation on page 85
Preparing the SRX210 Services Gateway for Rack-Mount Installation on page 85
Adjusting the Power Supply Adapter Tray for the SRX210 Services Gateway for
Rack-Mount Installation on page 87
Preparing the SRX210 Services Gateway for Desk-Mount Installation on page 88
Preparing the SRX210 Services Gateway for Wall-Mount Installation on page 89
You can mount an SRX210 Services Gateway in a rack, on a desk, or on a wall. See the
following topics for more information:
Preparing the SRX210 Services Gateway for Rack-Mount Installation on page 85
Preparing the SRX210 Services Gateway for Desk-Mount Installation on page 88
Preparing the SRX210 Services Gateway for Wall-Mount Installation on page 89
The mounting kits for rack, wall, and desk installation of the SRX210 Services Gateway
must be ordered separately. Contact your Juniper Networks customer service
representative for more information.
Site Preparation Checklist for the SRX210 Services Gateway on page 37
Unpacking the SRX210 Services Gateway on page 81
Clearance Requirements for Airflow and Hardware Maintenance of the SRX210 Services
Gateway on page 41
You can mount an SRX210 Services Gateway on four-post (telco) racks, enclosed
cabinets, and open-frame racks.
85