Show Logging - NETGEAR FSM7328PS - ProSafe 24 Port 10/100 L3 Managed Stackable Switch Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
Time Since
Counters Last
Cleared

18.1.6 show logging

This command displays the trap log that the switch maintains. The trap log contains a
maximum of 256 entries that wrap.
Note: Trap log information is not retained across a switch reset.
Format
Mode
Number of Traps
since last reset
Number of Traps
since log last
displayed
Log
System Up Time
Trap
18-14
VLAN Deletes - The number of VLANs on this switch that
have been created and then deleted since the last reboot.
The elapsed time, in days, hours, minutes, and seconds, since
the statistics for this switch were last cleared.
show logging
Privileged EXEC
The number of traps that have occurred since the last reset.
The number of traps that have occurred since the traps were
last displayed. Getting the traps by any method (terminal
interface display, Web display, upload file from switch etc.)
sets the counter to 0.
The sequence number of this trap.
The relative time since the last reboot of the switch at which
this trap occurred.
The relevant information of this trap.
v3.0, January 2008
System Maintenance Commands