Ip Vrrp Preempt; Ip Vrrp Priority - NETGEAR FSM7328PS - ProSafe 24 Port 10/100 L3 Managed Stackable Switch Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
14.5.5.1 no ip vrrp authentication
This command sets the default authorization details value for the virtual router configured
on a specified interface.
Format
Mode

14.5.6 ip vrrp preempt

This command sets the preemption mode value for the virtual router configured on a
specified interface. The parameter
1 to 255
Default
Format
Mode
14.5.6.1 no ip vrrp preempt
This command sets the default preemption mode value for the virtual router configured on
a specified interface.
Format
Mode

14.5.7 ip vrrp priority

This command sets the priority value for the virtual router configured on a specified
interface. The priority of the interface is a priority integer from 1 to 254. The parameter
is the virtual router ID which has an integer value ranges from 1 to 255.
<vrID>
Default
Format
Mode
14.5.7.1 no ip vrrp priority
This command sets the default priority value for the virtual router configured on a
specified interface.
Format
Mode
Routing Commands
no ip vrrp <vrID> authentication
Interface Config
is the virtual router ID, which is an integer from
<vrID>
enabled
ip vrrp <vrID> preempt
Interface Config
no ip vrrp <vrID> preempt
Interface Config
100
ip vrrp <vrID> priority <1-254>
Interface Config
no ip vrrp <vrID> priority
Interface Config
v3.0, January 2008
14-27