Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
4.4.3 macfilter
This command adds a static MAC filter entry for the MAC address <macaddr> on the
VLAN <vlanid>. The <macaddr> parameter must be specified as a 6-byte hexadecimal
number in the format of b1:b2:b3:b4:b5:b6.
The restricted MAC Addresses are: 00:00:00:00:00:00, 01:80:C2:00:00:00 to
01:80:C2:00:00:0F, 01:80:C2:00:00:20 to 01:80:C2:00:00:21, and FF:FF:FF:FF:FF:FF.
The <vlanid> parameter must identify a valid VLAN.
Up to 100 static MAC filters may be created.
Format
Mode
4.4.3.1 no macfilter
This command removes all filtering restrictions and the static MAC filter entry for the
MAC address <macaddr> on the VLAN <vlanid>. The <macaddr> parameter must be
specified as a 6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6.
The <vlanid> parameter must identify a valid VLAN.
Format
Mode
4.4.4 macfilter adddest
This command adds the interface to the destination filter set for the MAC filter with the
given <macaddr> and VLAN of <vlanid>. The <macaddr> parameter must be specified as
a 6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6.
The <vlanid> parameter must identify a valid VLAN.
Format
Mode
4-18
macfilter
<macaddr> <vlanid>
Global Config
no macfilter
<macaddr> <vlanid>
Global Config
macfilter adddest
<macaddr> <vlanid>
Interface Config
v3.0, January 2008
Port and System Setup Commands