Set Garp Timer Leaveall; Show Garp - NETGEAR FSM7328PS - ProSafe 24 Port 10/100 L3 Managed Stackable Switch Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,

8.1.3 set garp timer leaveall

This command sets how frequently
indicates that all registrations will be unregistered. Participants would need to rejoin in
order to maintain registration. The value applies per port and per GARP participation. The
time may range from 200 to 6000 (centiseconds). The value 1000 centiseconds is 10
seconds.
Note: This command has an effect only when GVRP is enabled
Default
Format
Modes
8.1.3.1 no set garp timer leaveall
This command sets how frequently
Note: This command has an effect only when GVRP is enabled.
Format
Modes

8.1.4 show garp

This command displays GARP information.
Format
Modes
GMRP Admin
Mode
8-4
Leave All PDUs
1000
set garp timer leaveall <200-6000>
Interface Config
Global Config
Leave All PDUs
no set garp timer leaveall
Interface Config
Global Config
show garp
Privileged EXEC
User EXEC
This displays the administrative mode of GMRP for the sys-
tem.
v3.0, January 2008
are generated. A
Leave All PDU
.
are generated the default.
GARP, GVRP, and GMRP Commands