Ip Http Secure-Protocol; Ip Http Secure-Server; Ip Http Server - NETGEAR FSM7328PS - ProSafe 24 Port 10/100 L3 Managed Stackable Switch Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,

3.6.2 ip http secure-protocol

This command is used to set protocol levels (versions). The protocol level can be set to
TLS1, SSL3 or to both TLS1 and SSL3.
Default
Format
Mode

3.6.3 ip http secure-server

This command is used to enable the secure socket layer for secure HTTP.
Default
Format
Mode
3.6.3.1 no ip http secure-server
This command is used to disable the secure socket layer for secure HTTP.
Format
Mode

3.6.4 ip http server

This command enables access to the switch through the Web interface. When access is
enabled, you can login to the switch from the Web interface. When access is disabled, you
cannot login to the switch's Web server. Disabling the Web interface takes effect
immediately and affects all interfaces.
Default
Format
Mode
3.6.4.1 no ip http server
This command disables access to the switch through the Web interface. When access is
disabled, you cannot login to the switch's Web server.
Format
Mode
3-18
SSL3 and TLS1
ip http secure-protocol [SSL3] [TLS1]
Privileged EXEC
disabled
ip http secure-server
Privileged EXEC
no ip http secure-server
Privileged EXEC
enabled
ip http server
Privileged EXEC
no ip http server
Privileged EXEC
v3.0, January 2008
Administrative Access Commands