Set Slot Disable; Set Slot Power - NETGEAR FSM7328PS - ProSafe 24 Port 10/100 L3 Managed Stackable Switch Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,

17.1.9 set slot disable

This command configures the administrative mode of the slot(s). If you specify
command is applied to all slots, otherwise the command is applied to the slot identified by
<unit/slot/port>
If a card or other module is present in the slot, this administrative mode will effectively be
applied to the contents of the slot. If the slot is empty, this administrative mode will be
applied to any module that is inserted into the slot. If a card is disabled, all the ports on the
device are operationally disabled and shown as "unplugged" on management screens.
Format
Mode
17.1.9.1 no set slot disable
This command unconfigures the administrative mode of the slot(s). If you specify
the command removes the configuration from all slots, otherwise the configuration is
removed from the slot identified by
If a card or other module is present in the slot, this administrative mode removes the
configuration from the contents of the slot. If the slot is empty, this administrative mode
removes the configuration from any module inserted into the slot. If a card is disabled, all
the ports on the device are operationally disabled and shown as "unplugged" on
management screens.
Format
Mode

17.1.10 set slot power

This command configures the power mode of the slot(s) and allows power to be supplied
to a card located in the slot. If you specify
otherwise the command is applied to the slot identified by
Use this command when installing or removing cards. If a card or other module is present
in this slot, the power mode is applied to the contents of the slot. If the slot is empty, the
power mode is applied to any card inserted into the slot.
Format
Mode
Stacking Commands
.
set slot disable [<unit/slot/port> | all]
Global Config
<unit/slot/port>
no set slot disable [<unit/slot/port> | all]
Global Config
set slot power [<unit/slot/port> | all]
Global Config
v3.0, January 2008
.
, the command is applied to all slots,
[all]
<unit/slot/port>.
, the
[all]
,
[all]
17-5