Split-Horizon; Redistribute - NETGEAR FSM7328PS - ProSafe 24 Port 10/100 L3 Managed Stackable Switch Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,

14.7.13 split-horizon

This command sets the RIP split horizon mode.
Default
Format
Mode
14.7.13.1 no split-horizon
This command sets the default RIP split horizon mode.
Format
Mode

14.7.14 redistribute

This command configures RIP protocol to redistribute routes from the specified source
protocol/routers. There are five possible match options. When you submit the command
redistribute ospf match <match-type> the match-type or types specified are added to any
match types presently being redistributed. Internal routes are redistributed by default.
Default
Format for OSPF
as source
protocol
Format for other
source protocol
Mode
14.7.14.1 no redistribute
This command de-configures RIP protocol to redistribute routes from the specified source
protocol/routers.
Format
Mode
Routing Commands
simple
split-horizon {none | simple | poison}
Router RIP Config
no split-horizon
Router RIP Config
metric - not-configured; match - internal
redistribute ospf [metric <0-15>] [match [inter-
nal] [external 1] [external 2] [nssa-external 1]
[nssa-external-2]]
redistribute {static | connected} [metric <0-15>]
Router RIP Config
no redistribute {ospf | static | connected} [met-
ric] [match [internal] [external 1] [external 2]
[nssa-external 1] [nssa-external-2]]
Router RIP Config
v3.0, January 2008
14-65